Circuit Board Shields:
10 Fence Series
Part Numbers
| 10 Fence Series | |||||
|---|---|---|---|---|---|
| STYLE | FIG. | A HEIGHT |
PIN SPACING |
C STANDOFFS |
D PIN LENGTH |
| 14R - CBS | 1 | .13 (3.3) |
.50 (12.7) |
N/A | .10 (2.54) |
| 14RA - CBS | 1 | .13 (3.3) |
.50 (12.7) |
N/A | .050 (1.27) |
| 18R - CBS | 1 | .13 (3.3) |
.50 (12.7) |
N/A | .13 (3.3) |
| FIGURE: .50" Pin Spacing, No Standoff | |||||
All Dimensions in Inches & (mm).
Standard Material .015 (.38) Pre-Tin Coated Steel.
Mounting Hole Patterns
Mounting hole patterns for all Style CBS series are detailed in the following examples.
Note: Pins that fall on corners will be removed.
Mounting hole patterns for your specific size assembly are available upon request.
(Please consult the factory for L-shape mounting hole patterns.)
Recommended hole size: .050" (1.27)
Example: Mounting Hole Pattern For 10 & 20 Series
Example: Opt #1 Mounting Hole Pattern For 10 & 20 Series
