Circuit Board Shields:
50 Fence Series
Part Numbers
| 50 Fence Series | |||||
|---|---|---|---|---|---|
| STYLE | FIG. | A HEIGHT |
B PIN SPACING |
C STANDOFFS |
D PIN LENGTH |
| 51 - CBS | 1 | .50 (12.7) |
1.0 (25.4) |
.05 (1.27) |
.12 (3.05) |
| 52 - CBS | 2 | .50 (12.7) |
1.0 (25.4) |
N/A | .12 (3.05) |
| 53 - CBS | 3 | .50 (12.7) |
.50 (12.7) |
.05 (1.27) |
.12 (3.05) |
| 53A - CBS | 3 | .50 (12.7) |
.50 (12.7) |
.05 (1.27) |
.06 (1.53) |
| 54 - CBS | 4 | .50 (12.7) |
.50 (12.7) |
N/A | .12 (3.05) |
| 55 - CBS | 1 | .50 (12.7) |
1.0 (25.4) |
.01 (.25) |
.12 (3.05) |
| 56 - CBS | 1 | .50 (12.7) |
1.0 (25.4) |
.05 (1.27) |
.15 (3.81) |
| 57 - CBS | 1 | .50 (12.7) |
1.0 (25.4) |
.01 (.25) |
.15 (3.81) |
| 58 - CBS | 2 | .50 (12.7) |
1.0 (25.4) |
N/A | .15 (3.81) |
| 59 - CBS | 5 | .50 (12.7) |
.25 (6.35) |
N/A | .12 (3.05) |
| FIGURE: 1 - 1.0" Pin Spacing, With Standoff FIGURE: 2 - 1.0" Pin Spacing, No Standoff FIGURE: 3 - .50" Pin Spacing, With Standoff FIGURE: 4 - .50" Pin Spacing, No Standoff FIGURE: 5 - .25" Pin Spacing, No Standoff |
|||||
All Dimensions in Inches & (mm).
Standard Material .015 (.38) Pre-Tin Coated Steel.
Mounting Hole Patterns
Mounting hole patterns for 40, 50, and 80 series are detailed in the following examples.
Note: Pins that fall on corners will be removed.
Mounting hole patterns for your specific size assembly are available upon request.
(Please consult the factory for L-shape mounting hole patterns.)
Recommended hole size: .050" (1.27)
Example: Mounting Hole Pattern For 1.0" (25.4)
Spacing - Series 40, 50, & 80
Example: Mounting Hole Pattern For 0.5" (12.7)
Spacing - Series 40, 50, & 80
Example: Opt #1 Mounting Hole Pattern For 1.0" (25.4)
Spacing - Series 40, 50, & 80
