Bisected Ferrites for Flat Cables
 |
Flat Cable Clamp with Full Outer Enclosure - for flat cables up to 64-conductor widths Ferrite assembly in fully enclosed nylon case. Four sizes functional with flat cables up to 64-conductor widths. Internal grip-lock tabs apply pressure on cable to maintain mounting position. May also be mounted with flat-head screws through the .120” (3,0mm) diameter holes on 1.25” (31,8mm) centers in the bottom by temporarily removing the lower ferrite half. Excellent for flex-circuits.  |
 |
Flat Cable Clamp with Full Outer Enclosure and Adhesive Mount - for flat cables up to 64-conductor widths Ferrite assembly in fully enclosed nylon case. Four sizes functional with flat cables up to 64-conductor widths. Internal grip-lock tabs apply pressure on cable to maintain mounting position. Installs easily on any mounting surface by removing liner from foam adhesive base pad. Excellent for flex-circuits. |
 |
Slim-Line Flat Cable Clamp with Cable Grip Openings - for flat cables up to 40-conductors Ferrite pair snaps together into the lowest profile nylon enclosure available. Three sizes accommodate flat cables up to 40-conductors. Internal grip-lock tabs maintain mounting position. Mounts also with flat-head screws through the .120” (3,0mm) diameter holes in the bottom by temporarily removing the lower ferrite half. Excellent for flex-circuits. |
 |
Slim-Line Flat Cable Clamp with Cable Grip Openings and Adhesive Mount - for flat cables up to 40-conductors Ferrite pair snaps together into the lowest profile nylon enclosure available. Three sizes accommodate flat cables up to 40-conductors. Internal grip-lock tabs apply pressure on cable to maintain mounting position. Installs easily on any mounting surface by removing liner from foam adhesive base pad. Excellent for flex-circuits. |
 |
Flat Cable Clamp with Adhesive Mount - flat cables up to 50-conductor widths Ferrite assembly bonded in nylon mounting clamp; easily installed by peeling protective paper strip from base and pressing into place. Nine sizes accommodate all flat cables up to 50-conductor width. |
 |
Flat Cable Clamp with Single Press-Fit Mount - flat cables up to 50-conductor widths Ferrite assembly bonded in nylon mounting clamp; easily installed by pressing the integral spring tab fastener into a .250” (6,4mm) diameter hole. Seven sizes accommodate all flat cables up to 50-conductor width. Fits substrates up to .070” (1,8mm) thickness. |
 |
Flat Cable Clamp with Dual Press-Fit Mounts - flat cables up to 50-conductor widths Ferrite assembly bonded in nylon mounting clamp; easily installed by pressing the integral spring tab fasteners into two .219” (5,6mm) diameter holes. Three sizes accommodate all flat cables up to 50-conductor width. Fits substrates up to .070” (1,8mm) thickness. |
 |
Flat Cable Clamp with Split End Caps, Hardware Mount - flat cables up to 64-conductor widths Ferrite assembly press-fitted into a pair of nylon end caps. Mounts using screws, push-rivets, or other hardware. Ten sizes accommodate flat cables up to 64-conductor width. |
 |
Flat Cable Clamp with Split End Caps, Adhesive Mount - flat cables up to 64-conductor widths Ferrite assembly press-fitted into a pair of nylon end caps with adhesive foam mounting pads. Ten sizes accommodate flat cables up to 64-conductor width. |
 |
High Impedance Flat Cable Clamp with Adhesive Mount - flat cables up to 50-conductor widths Extra wide ferrite assembly greatly increases effective magnetic path. Bonded in nylon mounting clamp; easily installed by peeling protective paper strip from base and pressing into place. Three sizes accommodate all flat cables up to 50-conductor width. |
 |
High Impedance Flat Cable Clamp with Single Press-Fit Mount - flat cables up to 50-conductor widths Extra wide ferrite assembly greatly increases effective magnetic path. Bonded in nylon mounting clamp; easily installed by pressing the integral spring tab fastener into a .250” (6,4mm) diameter hole. Three sizes accommodate all flat cables up to 50-conductor width. Fits substrates up to .070” (1,8mm) thickness. |
 |
High Impedance Flat Cable Clamp with Dual Press-Fit Mount - flat cables up to 50-conductor widths Extra wide ferrite assembly greatly increases effective magnetic path. Bonded in nylon mounting clamp; easily installed by pressing the integral spring tab fasteners into two .219” (5,6mm) diameter holes. Two sizes accommodate all flat cables up to 50-conductor width. Fits substrates up to .070” (1,8mm) thickness. |
 |
High Impedance Flat Cable Sleeve Clamp - flat cables up to 15-conductor widths Uniquely accommodates flat cables up to 15-conductors through the horizontal opening with substantially more impedance than standard flat clamps used typically for this type of application. Available with optional adhesive foam mounting pad base. |
