Bisected Ferrites for Round Cables

Cable Snap - for cables up to 2.0” (50,8mm)
Ferrite assembly in fully enclosed nylon case; functional with wires and cables up to a 2.0” (50,8mm) diameter. Snap closed around wire by clasping shut to position assembly. May also be mounted with a flat-head screw through the .120” (3,0mm) diameter hole in the bottom by temporarily removing lower ferrite half.

Cable Snap with Press-Fit Button Mount Base - for cables up to 1.0” (25,4mm)
Ferrite assembly in fully enclosed nylon case; functional with wires and cables up to a 1.0” (25,4mm) diameter. Includes a button mount base which press-fits into a .150” (3,8mm) diameter hole.

Cable Snap with Adhesive Mount Base - for cables up to 1.0” (25,4mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a 1.0” (25,4mm) diameter. After closing around wire and clasping shut, assembly is ready for mounting. Installs by removing protective paper strip from base and pressing into place.

Cable Snap with Screw Mount Base - for cables up to 1.0” (25,4mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a 1.0” (25,4mm) diameter. Mounting base press-fits into receptacle on bottom. Installs at the intended location with a screw through the .125” (3,2 mm) diameter hole provided. The base may be positioned at 90º increments relative to the upper case to provide four alternative assembly configurations.

Cable Snap with Variable Diameter End Ports - for cables up to .500 (12,7 mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a .500 (12,7 mm) diameter. End ports are surrounded with flexible spring flutes to grip a range of cable diameters from .120” to .500” (3,2 to 12,7 mm). The grip-locking action prevents lateral movement along the cable or wire bundle.

Large I.D. Cable Snap - for cables up to .520” (13,2mm)
Ferrite assembly in fully enclosed nylon case; functional with wires and cables up to a .520” (13,2mm) diameter. Snap closed around wire by clasping shut to position assembly. Cable tie-wraps may be threaded through the loops on each side.

Large I.D. Cable Snap with Press-Fit Mount - for cables up to .520” (13,2mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a .520” (13,2mm) diameter. After closing around wire and clasping shut, assembly snap-fits into mounting base. Base may be installed either before or after product assembly by pressing the integral spring tab fastener into a .187” (4,7mm) diameter hole.

Large I.D. Cable Snap with Adhesive Mounting Base - for cables up to.520” (13,2mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a .520” (13,2mm) diameter. After closing around wire and clasping shut, assembly is snap-fitted into its mounting base. May be installed in its intended location before or after product assembly simply by removing protective paper strip from base and pressing into place.

Large I.D. Cable Snap with Screw Mount Base - for cables up to .520” (13,2mm)
Ferrite assembly in fully enclosed nylon case; various sizes are functional with wires and cables up to a .520” (13,2mm) diameter. Mounting base is pre-installed at the intended location with a screw through the .125” (3,2mm) diameter hole in the bottom. After closing around wire and clasping shut, assembly snap-fits into base.

Cable Clamp -for cables up to 1.00” (25,4 mm)
Ferrite assembly bonded to nylon strap; functional with wires and cables up to a 1.00” (25,4 mm) diameter. Holes are provided for screw mounting.

Sleeve Snap - for cables up to .500” (12,7 mm)
Box-shaped ferrite assembly in enclosed nylon case. Various sizes are functional with wires up to .500” (12,7 mm) diameter. Simply clamp around cable or wire; plastic tabs at entry/exit ports apply pressure to cable surface to maintain mounting position. Options include foam adhesive pad on bottom.

Sleeve Snap for Cable Bundles - for bundles up to .730” (18,5mm)
Box-shaped ferrite assembly for cable bundle diameters up to .730” (18,5mm) diameter. Allows single location for RFI suppression for multiple cables. Each circuit reacts separately with the suppression material without saturation. Alternatively, multiple turns of a single cable greatly increases impedance depending on frequency. Optional adhesive mount base.

Sleeve Snap with Variable Diameter End Ports - for cables up to .730” (18,5 mm)
Box-shaped ferrite assembly in fully enclosed nylon case. End ports are surrounded with flexible spring flutes to grip a range of cable diameters from .125” to .730” (3,2 to 18,5 mm). Special mounting options include foam adhesive pad on bottom.

Internal Locking Snap with Secure Internal Locking System - for cables up to .300” (7,6mm)
Cannot be reopened after snapping closed into position. Ensures that suppressor cannot be removed. Grip-lock tabs at entry/exit ports prevent longitudinal slippage on a range of cable diameters from .275” to .300” (7,0 to 7,6mm). Standard colors are computer gray (PMS#413), computer beige (PMS#468), black and natural white. A cost-effective alternative to over-molding.

Jelly Bean Snap Miniature Sizee with Internal Locking System - for cables up to .120” (3,0mm)
Cannot be reopened after snapping closed into position. Ensures that suppressor cannot be removed. Grip-lock tabs at entry/exit ports prevent longitudinal slippage on a range of cable diameters from .060” to .120” (1,5 to 3,0mm). Excellent for tight spaces and low profile applications. A cost-effective alternative to “molded-in” suppressors, shrink tubing, tie wraps, taping and other secondary installation operations.

High Impedance Sleeve Snap with Optional Mounting Bases - for cables up to .468” (10,9mm)
High impedance ferrite assembly for large scale applications containing high data rates and microprocessor harmonics/spurious signals well beyond the operating frequency. Excellent for telecommunications switching applications, local area networks (LANs) and distribution system integration. The basic version simply clamps into position around cables and wiring. May also be mounted with a flat-head screw through the .120” (3,0mm) diameter hole in the bottom by temporarily removing lower ferrite half.

Other mounting options include a foam adhesive base, a button mount base sized for a .150” (3.8 mm) diameter hole, and a hardware mounting plate for screw or rivet attachment. The adhesive mount base and button mount base options are preassembled. The hardware mounting base may be press-fitted into the receptacle on the bottom of the case during installation in one of four positions at 90° increments for alternative assembly configurations.

High Impedance Sleeve Snap with Optional Mounting Bases with Variable Diameter End Ports and Optional Mounting Basesfor cables up to .435” (11,0mm)
High impedance ferrite assembly with exactly the same characteristics as the high impedance sleeve snaps above, except that the entry/exit end ports are surrounded with flexible spring flutes to grip a range of cable diameters from .250” to .435” (6,4 to 11,0mm). Excellent for telecommunications switching applications, local area networks (LANs) and distribution system integration. The basic version simply clamps into position around cables and wiring. May also be mounted with a flat-head screw through the .120” (3,0mm) diameter hole in the bottom by temporarily removing lower ferrite half.

Other mounting options include a foam adhesive base, a button mount base sized for a .150” (3.8mm) diameter hole, and a hardware mounting plate for screw or rivet attachment. The adhesive mount base and button mount base options are preassembled. The hardware mounting base may be press-fitted into the receptacle on the bottom of the case during installation in one of four positions at 90° increments for alternative assembly configurations.

USB Cable Sleeve Snap with Variable Diameter End Ports - for cables up to .179” (4,5mm)
Specifically sized to fit the range of common USB I/O cable diameters; variable diameter end ports allow for different types of cable insulation covers measuring .125” to .179” (3,0 - 4,5mm). Simple snap-on installation. Available with optional adhesive pad on bottom, and in standard gray (PMS #413) and black colors.

Telecom Cable Snaps with End Ports for Flat-Oval Cables - Two sizes: one for 4-conductor and one for 6-conductor standard telecom flat-oval cable.
Box-shaped ferrite assembly in fully enclosed nylon case. Two sizes: one for 4-conductor and one for 6-conductor standard telecom flat-oval cable. Clamps around cable with appropriate pressure to maintain desired position.

Very High Impedance Multi-Turn Sleeve Snap with Serpentine Cable Threading Capability
By increasing the number of times the circuit passes through the ferrite core, the effective magnetic path is lengthened yielding a significant increase in impedance. The gain is equal to N2, the square of the number of turns, and depending on the circuit cable load and frequencies involved, much of the increase can be realized. Cables may be “looped back through”. In an alternate configuration, separate cable circuits can be accommodated without saturation. Three styles permit different approaches:
  • The 1-hole allows two passes of a cable with a diameter up to .365” (9 ,3mm) or three passes of a cable with a diameter up to .243” (6,2mm)
  • The 2-hole allows two passes of a cable with a diameter up to .335” (8,5mm)
  • The 3-hole allows three passes of cable with a diameter up to .203” (5,8mm)


Cable Bundle Clamp with Universal Mounting Strap - for bundles up to 1.00” (25,4mm)
For cable bundle diameters up to 1.00” (25,4mm). Allows single location for RFI suppression for multiple cables and wiring runs. Each circuit reacts independently with the suppression material without saturation. Adhesive mount base also provides a centered .203” (5,1mm) diameter hole for optional hardware attachment. Quick-release closure clip allows easy addition or removal of wires.

Copyright © Leader Tech, Inc. All rights reserved.
Home | About Us | Contact Us | Site Map