Finger Stock EMI Gaskets:
Folded Series
Part Numbers
| Folded Series FS | Comp=Compressed | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| click here for all part numbers and specs (PDF: 501K) | ||||||||||||||||||||
11-
28-
FS-
XX-16 |
23-
60FS-
XX-24 |
|||||||||||||||||||
11-
S-
28-
FS-
XX-16 |
23-S-
60FS-
XX-24 |
|||||||||||||||||||
14-
37FS-
XX-16 |
25-
78FS-
XX-24 |
|||||||||||||||||||
14-S-
37FS-
XX-16 |
25-S-
78FS-
XX-24 |
|||||||||||||||||||
| The Leader Tech FS gaskets are industry standard general-purpose gaskets that allow a large range of deflection and compression forces. The gaskets are available without tape for alternate attachment methods. |
||||||||||||||||||||
All Dimensions in Inches & (mm).
| Folded Series FSC | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| click here for all part numbers and specs (PDF: 501K) | ||||||||||||||
11-
37FSC-
XX-16 |
14-S-
51FSC-
XX-16 |
|||||||||||||
11-S-
37FSC-
XX-16 |
23-
76FSC-
XX-24 |
|||||||||||||
14-
51FSC-
XX-16 |
23-S-
76FSC-
XX-24 |
|||||||||||||
| The FSC was created to provide snag free gaskets with FS gasket features. The base of the gasket is extended from the mounting area and then folded up, over, down, and then comes to rest over the leading edge of the formed spring. Under compression, the leading edge of the gasket slides under and is "captured." This "no snag" feature is also used to prevent possible gasket damage. |
||||||||||||||
All Dimensions in Inches & (mm).
| Folded Series FSV | Comp=Compressed | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| click here for all part numbers and specs (PDF: 501K) | ||||||||||||||||||||
11-
28FSV23-
XX-16 |
23-
60FSV50-
XX-24 |
|||||||||||||||||||
11-S-
28FSV23-
XX-16 |
23-S-
60FSV50-
XX-24 |
|||||||||||||||||||
14-
37FSV30-
XX-16 |
25-
78FSV50-
XX-24 |
|||||||||||||||||||
14-S-
37FSV30-
XX-16 |
25-S-
78FSV50-
XX-24 |
|||||||||||||||||||
| The FSV is an FS gasket with its base bent on the right angle to the curve on the spring form, with all the other features of the FS gasket maintained. | ||||||||||||||||||||
All Dimensions in Inches & (mm).
| Folded Series FSDS | Comp=Compressed | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| click here for all part numbers and specs (PDF: 501K) | |||||||||||||||||||
25-
109FSDS-
XX-24 |
25-S-
109FSDS-
XX-24 |
||||||||||||||||||
25-
109FSDS-
BD-300 |
0 |
||||||||||||||||||
| The FSDS is an FS gasket with its base lying on the
same plane as the curve in the spring form, with the mounting area
shortened. This mounting is often modified for custom applications. |
|||||||||||||||||||
All Dimensions in Inches & (mm).