Order Information

Thanks for choosing Leader Tech!

We welcome the opportunity to serve you. To place an order or to request a quote, please select one of the following products:

Circuit Board Shielding
EMI Gaskets

To make ordering even easier, we now accept Visa, MasterCard, and American Express!

CIRCUIT BOARD SHIELDING
Order (Quote) Information

Part No.   Width  Length  Height (from PcB to inside cover)
53-CBS--   2.0  X   3.0  X   .55
                    |           |         |
                    |           |         |__ Available from .13" to 2.00" (3.3 to 50.8)
                    |           |__ In .25" (6.35) increments from .50" to 24.00" (12.7 to 609.6)
                    |__ In .25" (6.35) increments from .50" to 12.00" (12.7 to 304.8)

Please Specify:

Dimples for positive locking, if required (40, 50, and 80 series only)
How parts are to be supplied:
- Flat fence and formed cover
- Formed fence, formed cover, unassembled
- Assembled fence and cover
- Formed for surface mount

Ordering Information "Example"

Part No. Width Length Height
(under the cover assembly height)
Example: 53-CBSFPSV- 2.0 X 3.0 X .55
This part utilizes a 50 Series fence 1/2" pin spacing with .05" standoffs (53) part will be supplied formed fence, formed cover (F), material utilized is Pre-Plate Phos-Bronze (P), with standard vent holes (SV) and dimensions are 2" wide by 3" long, with a .55" height from PcB to inside cover.

Leader Tech Style CBS Quote Form

Basic Information

* indicates a required field.

Company Name Your PN Rev Leader Tech PN Quote Number Quote Date *Your Name *Address *City *State *Zip *Phone Fax *Email

Available Options

	Flat Fence (U)		Fence Hole (FH)
	Formed Fence (F)		Fence Notch (FN)
	Assembled		Post Plated Steel (PS)
	Surf. Mt. (SM)		Pre-Plated Phos. Brz. (P)
	Cover Hole (CH)		Dimples (D)
	Cover Notch (CN)

Ventilation Holes

Standard (SV) 15% Open

Double Density (DV) 30% Open

Products

Quantity	Fence	Style	Options	Width	Length	Height*
		-CBS
		-CBS
		-CBS
		-CBS

* indicates Height under cover

Your Questions and/or Comments Questions and/or Comments

For standard product quotes, you may also print a CBS quote form and fax to 813-855-3291.

EMI GASKETS
Ordering Information

When placing an order or requesting a quotation, please give part number, your required finish I.D. from the chart below, and required length.

Part Number Example:
Stock Item	Finish I.D.	Length
11-S-32RH	Sn	16
The above example is the "Slot Mount Series" gasket. The height is .11 inch and the width is .32 inch. The "S" indicates a soft gasket. The "Sn" indicates a bright tin finish. See "Required Finish" table for list of available finishes. This part is available in standard lengths of 16 inches. Please consult factory for custom lengths.

Finishes:
Required Finish	I.D.
Bright Finish	Bd
Bright Tin	Sn
Bright Nickel	Ni
Zinc/Chromate Clear	ZnC
Zinc/Chromate Yellow	ZnY
Cadmium Chromate	CdC
Silver	S
Gold	G
Standard plating finish is .0002" ± .0001" (gold .00005" min.). Gold plating must be specified prior to quote. Other finishes available upon request.

Leader Tech EMI Gaskets Quote Form

Basic Information

* indicates a required field.

Company Name Your PN Rev Leader Tech PN Quote Number Quote Date *Your Name *Address *City *State *Zip *Phone Fax *Email

Available Finishes

	Bright Finish (Bd)		Bright Tin (Sn)
	Zinc/Chromate (ZnC)		Nickel (Ni)
	Cadmium/Chromate (CdC)		Silver (Ag)
	Tin/Lead (SnPb)		Gold (Au)

Products

Quantity	Size	Style	Finish	Length	or # Fingers

Your Questions and/or Comments Questions and/or Comments

For standard product quotes, you may also print an EMI quote form and fax to 813-855-3291.

Please note this form is for standard products only. For specialized products, we offer our Design Tech Process. Leader Tech can custom design a product or modify a standard product to meet your needs.

Our Products

Our Company

Other Information